利用高频结构仿真器分析波导魔T

高频结构仿真器（HFSS）是一种微波器件设计软件，该软件界面友好，通过仿真计算减小了调试工作量，使得微波器件的设计变得简单易行。本文利用HFSS对波导魔T进行了仿真分析，得到了该器件的S参数和动、静态场的分布情况，并对该器件进行了优化设计。     

一种改进的新三步搜索算法

在对三步法工作原理进行研究的基础上提出了新三步搜索算法（NITSS）。该方法充分利用视频序列运动矢量概率分布上的中心偏置特性．在三步搜索算法的基础上引入了十字型分布的4个点构成搜索点群。实验结果表明。新三步搜索算法解决了三步法的小运动估计效果较差问题．提高了搜索精度，保持了三步法的高效率。     

AlSb晶体内二维磁极化子的磁场与温度效应

在考虑声子之间相互作用的同时，本文应用线性组合算符和微扰法研究了电子自旋对弱耦合二维磁极化子特性的影响。对AlSb晶体所作的数值计算结果表明，随着磁场的加强，磁极化子平均数减少；随着温度的增加，磁极化子平均数也增加；随着温度的增加，电子自旋作用以及声子之间相互作用都加强；随着磁场的加强，电子自旋作用增加而声子之间相互作用基本不变。     

高分散度Pt/C电催化剂的制备

Cabot公司Vulcan XC-72型炭黑，经过H2O2氧化处理后作为Pt的载体，H2PtCl6作为金属前驱体制备了高度分散的Pt/C催化剂。讨论了不同条件下H2PtCl6在炭黑上的吸附性能。载体经过H2O2氧化处理24h,H2PtCl6在pH=9下吸收48h，H2 350℃还原2h，可以制备出铂晶粒平均大小为1.8nm的Pt/C电催化剂。     

Capture of Organic Vapors Using Adsorption and Electrothermal Regeneration

Activated-carbon-fiber cloth (ACFC) is an alternative adsorbent to granular activated carbon (GAC) for removing and recovering organic vapors from gas streams. Electrothermal desorption (ED) of ACFC provides rapid regeneration while requiring less energy compared to traditional regeneration techniques used with GAC. This paper provides proof-of-concept results from a bench-scale ACFC adsorption system. The automated system captured 1,000 ppmv of hazardous air pollutants/volatile organic compounds (HAPs/VOCs) from air streams and demonstrated the use of ED, using ac voltage, to recover the HAP/VOC as a pure liquid. The desorbed HAP/VOC condensed onto the inner walls of the adsorber and was collected at the bottom of the vessel, without the use of ancillary cooling. Seventy percent of the HAP/VOC was collected per cycle as condensate, with the balance being retained in the regenerated adsorber or recycled to the second adsorber. ED with in-vessel condensation results in minimal N2 consumption and short regeneration cycle times allowing the process to be cost competitive with conventional GAC-based adsorption processes. This technology extends the application of carbon adsorption systems to situations that were previously economically and physically impractical.     

Annealing effects on structural and electrical properties of fluorinated amorphous carbon films deposited by plasma enhanced chemical vapor deposition

The annealing effects on the structural and electrical properties of fluorinated amorphous carbon (a-C:F) thin films prepared from C₆F₆ and Ar plasma are investigated in a N₂ environment at 200 mTorr. The a-C:F films deposited at room temperature are thermally stable up to 250 °C, but as the annealing temperature is increased beyond 300 °C, the fluorine incorporation in the film is reduced, and the degree of crosslinking and graphitization in the film appears to be enhanced. At the annealing temperature of 250 °C, the chemical bond structures of the film are unchanged noticeably, but the interface trapped charges between the film and the silicon substrate are reduced significantly. The increased annealing temperature contributes the decrease of both the interface charges and the effective charge density in the a-C:F film. Higher self-bias voltage is shown to reduce the charge density in the film.     

对空监视雷达探测威力检飞的几个问题

以新的观点论证了对空监视雷达探测威力检验飞行中所需的采样点数和飞行架次，讨论了预警机雷达威力检飞的特殊问题，包括地区选择、航线设计和目标机标定等。     

Flow Reaction Forces upon Blowdown of Safety Valves

The activation of safety valves causes the development of flow reaction forces that have to be transferred in an adequate way via the piping to the steel structure or via the connected vessel into the foundation. If the safety valve outlet piping is connected to a blowdown system or, in case of blowing off into the atmosphere, are equipped with a T‐piece at the outlet, the stationary reaction forces are compensated completely. The transient opening process, however, develops flow reaction forces which culminate in peaks of short duration. In this article, a simple method will be proposed for the estimation of the resulting reaction forces as a function of the length of the pipe at the safety valve outlet. CFD calculations and blowdown tests executed with a full‐lift safety valve have confirmed this method on principle. Special importance is attributed to the short duration of the effect of the reaction forces which seems to have only a negligible impact on the supporting steel structure.     

大庆长垣以东地区深层天然气输导特征及成藏

大庆长垣以东地区深层天然气输导通道主要由断裂、不整合面和砂体构成。该区砂体横向分布不稳定，物性差，不是天然气侧向长距离运移的输导通道，但可以起到衔接输导作用。输导通道时该区天然气成藏与分布起到了重要控制作用，主要表现在断裂将天然气输导致上覆不同储集层中聚集成藏。不整合面和砂体将天然气输导到四周古隆起上聚集成藏。沿断裂输导的天然气形成以断层为主的构造气藏。沿不整合面和砂体输导的天然气形成以地层及岩性为主的气藏。沿断裂输导运移聚集的天然气在剖面上呈串多层分布，沿不整合面和砂体输导运移聚集的天然气在平面上呈环状分布。     

基于中压加氢改质方案的炼油流程协同优化

中国石化北京燕山分公司(简称燕山分公司）为增产高附加值产品、提升效益，对炼油系统进行了流程协同优化。中压加氢裂化装置掺炼催化裂化柴油，由加氢裂化方案改为加氢改质方案运行，将改质柴油送入三号催化裂化装置（简称三催化装置）的提升管进行回炼；同时，将焦化蜡油改入加氢裂化装置进行加工，而蜡油加氢装置不再加工焦化蜡油以改善催化裂化原料。协同优化后，中压加氢改质装置的柴油产品十六烷值提高7个单位；三催化装置的液化气收率提高1.96百分点，汽油收率增加0.88百分点，总液体收率增加2.28百分点；高压加氢裂化装置喷气燃料产品的密度（20 ℃）降低至806 kg/m3，烟点为23.8 mm，尾油BMCI由11.8降低至10.8；蜡油加氢装置精制蜡油的饱和分质量分数提高4.68百分点，芳香分质量分数降低5.96百分点，氮质量分数降低0.06百分点，使催化裂化原料性质得以改善。通过将中压加氢改质装置的喷气燃料馏分抽出送催化裂化装置回炼，与回炼改质柴油相比，催化裂化汽油的研究法辛烷值（RON）增加1.0个单位，改质柴油十六烷值提高4.8个单位。通过全炼油板块系统性优化，燕山分公司车用柴油产品的十六烷值由53.5降低至51.5，解决了质量过剩问题。